This pillow is part of the group of pillows that I made for the bed in my master bedroom.
I've seen a lot of tutorials for making different designs of throw pillows, but I've seen very few for making a pillow sham. At least not where I've been looking anyway. ;o) So - I thought I'd try my hand at putting a tutorial together. I hope it comes across ok since this is my first attempt at one.
If you're interested in learning how to make a pillow sham, please don't be intimidated by the length of this two part tutorial. They are not difficult to make at all. If you can take a few measurements and sew a straight (or semi-straight!) line, you can make a sham by following these easy steps.
I'll go ahead and warn you - the rest of the pictures were taken in my workroom, so the background isn't all that pretty - that is unless you consider a well used work table, sewing machines, fabric racks and other workroom stuff pretty. ;o)
First up - cutting and assembly of the front of the sham.
I used four fabrics:
the main fabric for the pillow sham
fabric to cover cording (the cording fabric is not included in the picture - bad blogger!)
To begin, measure one side (not all the way around) of the pillow that will be going into the sham, from one side to the other (for the width) and from the top to the bottom (for the height).
Using your measurements, calculate the size of the pieces that you need to cut. I'm making a sham for a king size pillow. Here is my calculation for the size of the fabrics that I need to cut for the front of the sham:
36"=width of the pillow
6"=for a 3" flange on each side
+1"=1/2" of seam allowance on each side
43"=width of fabric piece to cut for the front
27"=height of the pillow
6"=for a 3" flange on the top and bottom
+1"=1/2" of seam allowance on the top and bottom
34"=height of fabric piece to cut for the front
In other words - I need to cut the fabrics for the front of the sham at 43" wide x 34" high. I need to cut three pieces of fabric this size - the main fabric, the white lining and the batting. I'll explain why I'm using batting and white lining a few sentences down.
Layer all three of the cut pieces in this order:
main fabric on the bottom - face (or right) side of the fabric down
the batting in the middle
the white lining on the top.
The layers will look like this:
Now let me stop right here and explain a couple of things. Do you know what a flange is on a pillow sham? I can show you a picture better than I can explain it:
See the flat part that surrounds the puffiness where the pillow is? That's the flange.
The other thing that I want to explain is why I am using a piece of batting. I've found that adding a piece of batting to the front of the sham is the only thing that has enough stiffness to keep the flange from flopping over when the pillow is standing up. I don't like a floppy flange! You can skip the batting if a floppy flange doesn't bother you though.
The white lining is added to act as a barrier so that the batting won't get snagged when inserting the pillow into the sham. If you decide not to use batting, you can skip this too (although I think it makes a nicer finished product when it's lined).
Sew the layers together on all four sides using a basting stitch. How do you like my old workhorse industrial machine?
The next step is to apply the already covered cording. There are many places on the web to find directions on how to cover cording, so I won't go into the details about how to do that here (but don't hesitate to ask if you have any questions).
Once you've basted the cording to the front of the sham, return to the beginning and end of the cord. Clip open the stitches from when you first covered the cord and pull back the fabric to expose the cord itself. It should look like this.
Cut about an inch of each end of the cord so that it will roughly half of it's original width. Lay the two cut ends side by side, overlapping each other.
Now wrap the layers of fabric back around the cord. Turn under the raw edge of the top layer of fabric so that you won't be left with a raw edge. Sew the loose ends of the cord to the sham fabric.
This is a good place to stop part 1 of the tutorial. You've cut all of the pieces for the front, basted them together and applied your covered cord. Great job! In part two, we'll cover the cutting and assembly of the back and do the final assembly of the sham.